Discount up to 35% for first purchase only this month.
| Brand |
|---|
Mercury UPS ELITE 1000VA Pro Smart Line Interactive UPS ELITE1000 PRO- LCD display- Real capacity 1000VA- Wide input voltage range (140~300VAC)- Compatible with generators Overload protection Short circuit protection- Built-in AVR- Battery deep discharge protection- & overcharge protection.
| Brand Mercury | Model ELITE1000PRO |
| Hard Disk Capacity | |
| Power Capacity (VA): | 1000VA/600W |
| Input Voltage | 220VAC |
| Input Frequency | 50Hz |
| Input Phase | Single Phase |
| Input Socket with FUSE | |
| Cold Start | (0~100% load) Press the ON / OFF Switch |
| Input Range | (220V) 140V~285V |
| Normal Frequency | 50Hz |
| Rating Output (VA) | 1000VA |
| Rating Output (W) | 600W |
| Waveform Battery Mode (Simulated Sine Wave) | AC Mode (Sine Wave) |
| Power Factor | 0.6 |
| Rating Voltage | 220V |
| Output Range | 220VAC 17~22% (No Load Connected) |
| Rear Output | Socket 3x IEC – Battery Backup |
| Transfer Time | Typical 8ms (max 15ms) |
| Short Circuit Protection Line Mode FUSE & Software Protection | 100%~120% (gives alarm & shut down in 3min) |
| 120%~130% (beeps alarm & shut down in 30s) | |
| >130% (shut down immediately) | |
| Battery Mode Software Protection controlled by CPU | 100%~110% (gives alarm & shut down in 10s) |
| >110% (shut down immediately) | |
| Battery & Runtime Rating | 12V / 9AH x1 |
| Battery & Runtime Backup Time | Typical 8mins~20mins |
| Battery & Runtime Change | Current 1.5A (max) |
| Battery & Runtime Over Charge | >14.8V ±0.5 (Stop Charging) |
| Battery & Runtime Protection | <13.5V ±0.5 (Recharge) |
| Weight (kg) | 7.5 |
| Warranty | 1 year |
| Colors | silver |
| Dimension (mm) | 370 x 145 x 230 |
| Master Carton | (mm) 393 x 310 x 267 (2pcs) |
| Output Rating Frequency | 50Hz |
| Output Line Mode | Synchronize with the Utility |
| Output Battery Mode | 50Hz ±1Hz |
27%
26%
Reviews
There are no reviews yet.