Dell PowerEdge R350 Rack Server E-2314 -128G-3 X 2.4TB-3 Yrs

Dell EMC PowerEdge R350 review: Design and build

The R350 is very well-built. Removing the lid reveals a tidy interior with cabling neatly tucked away and unrestricted access afforded to all key hardware components. Underneath a plastic air shroud to the right, you’ll find the single CPU socket with the 6-core 2.9GHz Intel Xeon E-2336 in our system topped off with a solid passive heatsink.

The standard heatsink is rated for CPUs up to an 80W TDP so if you specify the 95W Xeon E-2386G or E2388G chips, you’ll get a larger one. To the side of the CPU are four DIMM slots and the price we’ve shown includes a single 32GB stick of 3,200MHz DDR4 memory, leaving three spare slots for boosting this to the maximum 128GB.

Cooling for all versions of the R350 is handled by a bank of four cold-swap, dual-rotor fan modules lined up in front of the motherboard. We initially found their noise levels quite noticeable but after playing around with the management settings and changing the default thermal fan profile to the Sound Cap option, this was reduced considerably.

The 350W hot-plug Bronze PSUs in the previous generation R340 have been upgraded in the R350 to more powerful 600W Platinum 80 Plus models. The server can be run with just one, but our configuration has dual PSUs for added redundancy.

The motherboard offers a pair of embedded Gigabit ports and further expansion is facilitated by a riser card with a PCI-E 4 slot on each side. Both accept half-length (HL), half-height (HH) cards with Dell offering dual or quad port Gigabit and dual copper or SFP 10-Gigabit adapters.

Dell EMC PowerEdge R350 review: Storage variables

The R350 supports twice as many PERC cards as the R250 because it has a mount point and connector on the drive backplane for a front RAID card with four versions available. Our system came with an entry-level PERC H345 Front Load adapter which provides SAS3 and SATA support along with hardware-managed RAID0, 1 and 10 arrays – the 700-series of adapters extend these to RAID5 and 6 plus battery protected cache memory.

The H345 card is cabled through to the motherboard and Dell has been quite clever here as there’s a dedicated PCI-E 4 PERC side slot below the riser cage. This has a dual purpose as it accepts standard adapter PERC (aPERC) cards while in our case, it was occupied by a simple front PERC (fPERC) pass-through card servicing the H345 adapter.

For general storage duties, we’ve included two 480GB SATA SSDs but Dell offers a big choice of SAS and SATA HDDs and SSDs. We can’t see many SMBs tempted by Dell’s high capacity models though, as they’re a bit pricey with a 4TB read-intensive SATA SSD costing nearly £3,000.

Still, you won’t need to use them for the operating system as the BOSS S2 card is designed specifically for this task. Tucked up next to the PSU bay, it presents two M.2 SATA SSD slots in hot-swap carriers that can be easily accessed from the rear and we’ve included one with dual mirrored 240GB SSDs.

A hypervisor hosting alternative to the BOSS S2 is Dell’s internal dual SD module (IDSDM) card which has two SD Card slots, supports mirroring and fits in a dedicated slot at the front of the motherboard. If you’re happy to run a hypervisor on a single USB stick, the slot also accepts Dell’s internal USB 3 card which only costs £26.

Dell EMC PowerEdge R350 review: Management choices

It may be an entry-level server but the R350 sports the same iDRAC9 remote controller and dedicated Gigabit port as its bigger PowerEdge brothers. Its smart web console presents a wealth of information on server operations plus a full hardware inventory and direct access to BIOS and storage configurations.

You can choose from five licenses – Basic and Express are very similar, with the latter adding real-time power and temperature graphing. If you want full remote OS control and remote media services though, you’ll need an Enterprise license, while the Datacenter option adds advanced services such as streaming telemetry.

All PowerEdge servers can be managed and monitored from the free OpenManage Enterprise (OME) software which we run in the lab as a Hyper-V VM. Adding an iDRAC9 OME Enterprise Advanced license enables the Power Manager plug-in and as long as you have a valid support contract, you can use the free CloudIQ cloud hosted service which provides server telemetry and predictive analytics.

Dell EMC PowerEdge R350 review: Verdict

The PowerEdge R350 will appeal to SMBs as this entry-level rack server combines Xeon E-2300 power with a high expansion potential, making it a good long-term investment. Storage options are plentiful too, and you won’t find better remote management facilities anywhere else either.

Dell PowerEdge R350 Rack Server Power Supply :  600 W Platinum AC/100 – 240 V

Network Options : 2 x 1GbE LOM

Front Ports

•         1 x iDRAC Direct (Micro-AB USB) port
•         1 x USB 2.0

Rear Ports

•         1 x USB 2.0
•         1 x USB 3.0
•         2 x Ethernet
•         1 x VGA

Internal Ports : 1 x USB 3.0 (optional)

PCIe : 3 x PCIe Gen4 slots

Video Card : 1 x VGA

Bezel : Optional LCD bezel or security bezel

Height : 1.7 in. (42.8 mm)

Width : 17.09 in. (434.0 mm)

Depth with Bezel : 22.44 in. (570.23 mm)

Depth without Bezel : 21.90 in. (556.59 mm)

Dell PowerEdge R350 Rack Server Weight: Max : 29.98 lbs. (13.6 kg)

Rack Support :

•         ReadyRails II sliding rails with optional cable management arm (CMA) and strain relief bar (SRB) for 4-post racks.
•         Combo (Drop-in/Slide-in) rails with optional CMA and SRB for 4-post racks.
•         ReadyRails static rails for 4-post and 2-post racks.

Recommended Support : 

Choose Dell ProSupport Plus for critical systems or Dell ProSupport for premium hardware and software support for your PowerEdge solution.

Consulting and deployment offerings are also available.

Contact your Dell representative today for more information.

Availability and terms of Dell Services vary by region.