UPS Mercury ELITE 1000 V/A 600W
Brand | Mercury |
Model | ELITE1000 PRO |
Hard Disk Capacity Power Capacity (VA) | 1000VA/600W |
Input Voltage | 220VAC |
Input Frequency | 50Hz |
Input Phase | Single Phase |
Input Socket | with FUSE |
Cold Start | (0~100% load) Press the ON / OFF Switch |
Input Range | (220V) 140V~285V |
Normal Frequency | 50Hz |
Rating Output (VA) | 1000VA |
Rating Output (W) | 600W |
Waveform Battery Mode | (Simulated Sine Wave) |
AC Mode | AC Mode (Sine Wave) |
Power Factor | 0.6 |
Rating Voltage | 220V |
Output Range | 220VAC +17~22% |
Rear Output Socket | 3x IEC – Battery Backup |
Transfer Time | Typical 8ms (max 15ms) |
Short Circuit Protection Line Mode FUSE & Software Protection | 100%~120% (gives alarm & shut down in 3min) |
120%~130% (beeps alarm & shut down in 30s) | |
>130% (shut down immediately) | |
Battery Mode Software Protection controlled by CPU | 100%~110% (gives alarm & shut down in 10s) |
>110% (shut down immediately) | |
Battery & Runtime Rating 12V / 9AH x1 | |
Battery & Runtime Backup Time Typical 8mins~20mins | |
Battery & Runtime Change Current 1.5A (max) | |
Battery & Runtime Over Charge >14.8V ±0.5 (Stop Charging) | |
Battery & Runtime Protection <13.5V ±0.5 (Recharge) | |
Weight (Kg) | 7.5 (kg) |
Warranty | 1 year |
Colors | silver |
Reviews
Clear filtersThere are no reviews yet.